Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #2109

    Amendola
    Community Member
    • ★★★★

    Dear Antti and Crawford,

    we can support you both to selected the proper Hardware suitable for reading Axzon sensors. We have also customisable Software to collect real time data and interface them with your factory system.

    Feel free to contact me amendola@radio6ense.com

    Best, Sara

     

    0
    #1964

    Amendola
    Community Member
    • ★★★★

    I think it is possibile but you have to properly re-design the tag such to have the temperature sensor, i.e. the IC, close to the inner part of the ear, otherwise the temperature will be too affected by the external ambient conditions. Please contact me if you like to discuss further in detail. (amendola@radio6ense.com)

    0
    #1875

    Amendola
    Community Member
    • ★★★★

    Yes, we did. For more info please contact me at amendola@radio6ense.com

    1+
    #1484

    Amendola
    Community Member
    • ★★★★

    Hi,
    can you better  explain how to send both the temperature Select and the EPC Select at the beginning of the same inventory round?
    I’m using the Thing Magic M6e reader, below a piece of my c#code:

    =====================================
    SimpleReadPlan readPlan;
    byte[] mask = { };
    Gen2.Select select = new Gen2.Select(false, Gen2.Bank.USER, 0xE0, 0, mask);
    TagOp TemperatureCode = new Gen2.ReadData(Gen2.Bank. RESERVED, 0xE, 1);
    readPlan = new SimpleReadPlan(ant, TagProtocol.GEN2, select, TemperatureCode, true, 1000);
    Program.handle.ParamSet(“/ reader/read/plan”, readPlan);
    TagReadData[] tags;
    tags = Program.handle.Read(150);
    ==================================

    In this case I have no filter based on the tag EPC. Where should I put the second select command? (only 1 select command can be put as input parameter of the SimpleReadPlan…)

    Thanks for the support

    0
Viewing 4 posts - 1 through 4 (of 4 total)