Temp & Pressure

Forums Forums General Discussions Temp & Pressure

This topic contains 1 reply, has 2 voices, and was last updated by  Greg Pitner 11 months, 1 week ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #1337

    Community Member
    • ★★★★

    Hi, we would like to use wireless temp & pressure sensors.

    Temp dictates a RFM3200, but is pressure sensing achievable with the same sensor or should we combine an additionnal RFM2100?

    What would be your advice?

    Thanks to reply by email.



    Greg Pitner
    RFMicron Team Member
    • ★★★★

    Pressure sensing, regardless of the tag used, requires an extra mechanism in addition to the tag itself. For example, you could have the pressure change cause a small movement in something with a metal coating. A tag placed appropriately could sense the change in the position of the metal, and the reader would interpret this as a pressure change. Both the RFM2100 and RFM3200 could be used in this way, but the exact details of the required mechanism would be different. This is a somewhat advanced topic, so we may need to have more in-depth discussions offline.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

Axzon (formerly RFMicron)

3700 N. Capital of Texas Hwy
Suite 570
Austin, TX 78746
Tel: (512) 535-4647