I’m currently trying to use AR52(RFM5208) reader along with RFM5209 data hub to gather sensor data and there’s some problem with the RFM5209’s hotspot functionality. Sometimes it’s available from my computer via wifi(axzondemo) but sometimes it just disappears right after the data hub completely boots. I’m wondering if there’s something like a switch or some approach by using the command line in the raspberry pi(RFM5209) that we can manually turn the hotspot on?
Additionally, even I’ve already connected my computer to the data hub via wifi, there is still no sensor data displayed in the dashboard from “sensor.demo.axzon.com”. I’ve connected the RFM5209 and the AR52 through the ethernet cable and the configuration setting of the AR52 was completely done following the “RFM5209 USER GUIDE” as below. Can anybody tell me how I can fix this problem?
Viewing 1 post (of 1 total)
You must be logged in to reply to this topic.
Axzon (formerly RFMicron)
3700 N. Capital of Texas Hwy
Austin, TX 78746
Tel: (512) 535-4647 Axzon.com