Forums Forums Frequently Asked Questions (FAQ’s) MagnusS3 programing

Tagged: 

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #20059
    Minoru
    Community Member
    • ★★★★

    Dear Gentleman,

    1.Please let us know the ‘Sensor code’. Sensor code is command? model#? …
    2.Do you have a sample program(c#) of getting temperature code on Octane API?

    Best Regards,
    Ashi

    #20060
    Martin
    RFMicron Team Member
    • ★★★★

    Ashi,

    The Sensor Code is an indication of the impedance seen by the tag antenna. Consequently, it provides information on the near-field presence and proximity of materials that affect impedance, such as water and metals. A couple of example applications are: moisture detection (diapers) and automotive water intrusion detection.

    The only sample code that we have is for Nordic ID and ThingMagic readers. It is located at: https://github.com/Axzon/reader-sample-code

    The sample code shows how to properly measure the Sensor Code, the On-Chip RSSI and Temperature.

    Regards,

    Martin

    #20530
    AFETTOUCHE
    Community Member
    • ★★★★

    Hello,

    I have a question about your C# code,

    I already tests the M6e reader on the Universal reader assistance of thingmagic everthing is ok,

    But when i run the code on the visual studio code, I obtained No tags found, with the right com and the right region.

    Could you please  help me with this part?

    Regards,

    #20531
    Martin
    RFMicron Team Member
    • ★★★★

    Hi,

    The Universal Reader Assistant uses by default maximum power, which is 30 dBm. But the sample code has a hard coded value of 20 dBm. So try changing this value. It is located in the following file:

    https://github.com/Axzon/reader-sample-code/blob/master/thingmagic/cs/src/Common.cs

    Line 29

    I hope it helps.

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.