Forums › Forums › Frequently Asked Questions (FAQ’s) › Is it possible to interface passive sensors and a PLC? Tagged: PLC, RFM3250, sensor This topic has 3 replies, 4 voices, and was last updated 11 months ago by PQSense , RFID Switchgear temperature monitoring system provider. Viewing 4 posts - 1 through 4 (of 4 total) Author Posts May 16, 2019 at 2:00 pm #1796 UrdanetaCommunity Member ★★★★ Is it possible to interface passive sensors (e.g. RFM3250) and a PLC? If so, what reader is used for this purpose? 1+ June 11, 2019 at 10:30 am #1875 AmendolaCommunity Member ★★★★ Yes, we did. For more info please contact me at amendola@radio6ense.com 1+ February 27, 2020 at 6:41 pm #2115 SalcedoCommunity Member ★★★★ Looking to see if we can interface sensor to phone app. 0 April 11, 2020 at 3:50 am #2135 PQSense , RFID Switchgear temperature monitoring system providerCommunity Member ★★★★ Yes, we hav ready made reader with built-in modbus protocol, it can inteface to any PLC , please contact me at cp.chen@pqsense.com Best Regards, 0 Author Posts Viewing 4 posts - 1 through 4 (of 4 total) You must be logged in to reply to this topic. Log In Username: Password: Keep me signed in Log In