Forums › Forums › Industry Applications › Application – Using RFM3260 in Autoclave This topic has 1 reply, 2 voices, and was last updated 11 months ago by PQSense , RFID Switchgear temperature monitoring system provider. Viewing 2 posts - 1 through 2 (of 2 total) Author Posts March 6, 2020 at 9:40 am #2119 EW MoiselCommunity Member ★★★★ How effective can RFM3260 be read from the outside of an autoclave that is made of 5mm steel. 30 Sensors will be spread over 12 meters. Will the NordicID R62 with 4 antennas distributed along the outside of the autoclave do the job? 0 April 10, 2020 at 11:56 pm #2130 PQSense , RFID Switchgear temperature monitoring system providerCommunity Member ★★★★ Hi EW, I don’t think you can read RFM3260 from outside of autoclave, the steel will block the antenna from sensor inside the autoclave. Best Regards, 0 Author Posts Viewing 2 posts - 1 through 2 (of 2 total) You must be logged in to reply to this topic. Log In Username: Password: Keep me signed in Log In